Installation Manual

OPERATION MODES
45
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
10.3 PEDESTRIAN WORKER’S TAG DISPLAY ALARM: WARNING
The presence of the pedestrian worker wearing an active TAG within the WARNING activation range is signalled to the
driver via the display by means of a clearly visible red ring.
The PRE-WARNING alarm indication remains visible and helps the driver locate the personnel on foot.
The red ring will remain lit up, together with the two lateral LEDs in the display, as long as the Tag is in this area.
The visual alarm is accompanied by two sound alarms that draw the driver’s attention. The first alarm, which is loud, is
emitted when the pedestrian worker enters the WARNING area, and the second alarm, which is low, reminds that the
pedestrian worker is still within the detection area.
In addition to a visual and sound alarm on the display, the system also activates a second relay of the CPU and two relays
present on the HUB.
All these alarms can be configured in the ALARM CONFIGURATION section.