Installation Manual

OPERATION MODES
43
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
10 OPERATION MODES
10.1 DISPLAY OVERVIEW
Main screen of EGOpro Safe MOVE 4.0 with 3 sensors installed without any detection of pedestrian workers or vehicles.
In addition, the following elements are also displayed on the screen:
1. Date and time
2. System Identification Code
3. Key to access configurations/settings
4. Key to access the section for data/log downloading
5. Key for the driver login
6. Position and status of the sensors installed. In this case, the three sensors, represented with a green circle, are
arranged as follows: two at the front and one at the rear. The green colour indicates the correct operation of
each sensor.
7. Status of the Warning detection (SR).
1
2
3
4
5
6
7