Installation Manual

TURNING-ON AND CONFIGURATION
33
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
9 TURNING-ON AND CONFIGURATION
9.1 TURNING ON THE SYSTEM
The system turns on automatically when the power supply (12/24VDC) is connected. While the system is turned on for the
first time, the initialisation screen is displayed.
Once initialisation is completed, the following screen is showed.
The first time the system is turned on takes more time.
The sensors, even if they are correctly installed, are not displayed by the system until the search procedure is
followed.