User guide

Copyright 2004 Advanced Merchant Solutions, Inc. Page 8
Charging Pocket Merchant
Your Pocket Merchant needs to be charged periodically. Included with the
Pocket Merchant is a Universal Charger, and 110V power cord. The Universal
Charger can operate on any voltage from 110VAC to 220VAC at 50 or 60 Hz
(cycles).
Your charger comes with a 110V power cord, but you can use an inexpensive
adaptor if you travel overseas.
When the adaptor is plugged into the wall outlet and the Pocket Merchant, both
the charge indicators on the charger and the printer will illuminate.
When the batteries have reached a full charge, the LED on the charger will flash.
The LED on the printer will not flash.
Figure 6 – Pocket Merchant Charger