User guide

For any reason, if the printer fails to respond to the power button, or fails to print

or read properly, there is a reset button on the back of the printer. See Resetting

the printer.

Data Connector

On the left side of the printer, there is a connector for the data cable. The

connector can only be properly inserted on way, as shown in the picture below.

Some cables have a sticker marked “TOP” in order to prevent incorrect insertion.

Figure 3 – Data connector orientation.

Battery Considerations

Your new Pocket Merchant reader / printer is equipped with built-in, high capacity

Ni-MH (Nickel – Metal Hydride) batteries. Please note that the new Ni-MH

battery reaches maximum performance levels only after having been discharged

and recharges at least two or three times.

Never use battery chargers that are damaged or worn. Battery life varies

depending, for example on print density and the text to be printed. Batteries may

be recharged and discharged hundreds of times, but they will wear out over time.

If not used, even a completely charged battery will discharge over time. Your

battery pack will come to a full charge in 70 to 90 minutes.