User guide

Copyright 2004 Advanced Merchant Solutions, Inc. Page 22
0 UPC-A 11≤k ≤12 48 ≤d ≤57
1 UPC-E 11≤k ≤12 48 ≤d ≤57
2 JAN13 (EAN) 12≤k ≤12 48 ≤d ≤57
3 JAN8 (EAN) 7≤k ≤8 48 ≤d ≤57
4 CODE39
1≤k
48 ≤d ≤57
65 ≤d ≤90,
32,36,37,43,45,46,47
5 ITF 1≤k (even number) 48 ≤d ≤57
1
6 CODABAR
1≤k
48 ≤d ≤57
65 ≤d ≤ 68,36,43
45,46,47,48
65 UPC-A 11≤n ≤12 48 ≤d ≤57
66 UPC-E 11≤n ≤12 48 ≤d ≤57
67 JAN13(EAN) 12≤n ≤13 48 ≤d ≤57
68 JAN8(EAN) 7≤n ≤8 48 ≤d ≤57
69 CODE39
1≤n ≤255
48 ≤d ≤57
65 ≤d ≤ 90,32,36,
37,43,45,46,47
70 ITF 1≤n ≤255 (even number) 48 ≤d ≤57
71 CODABAR
1≤n ≤255
48 ≤d ≤57
65 ≤d ≤ 68,36,43
45,46,47,58
72 CODE93 1≤n ≤255 0≤d ≤127
2
73 CODE128 2≤n ≤255 0≤d ≤127
[Description for ①]
d indicates the character code to be printed and k indicates the number of
characters to be printed.
[Description for ②]
n indicates the number of bar code data, and the printer processes n bytes from
the next character data as bar code data. d indicates the character code to be
printed.
[Notes for ①]
This command ends with a NUL code. When the bar code system used is UPC-
A or UPC-E, the printer prints the bar code data after receiving 12 bytes bar code
data and processing the following data as normal data. When the bar code
system used is JAN 13,the printer prints the bar code after receiving 13 bytes bar
code data and processes the following data as normal data. When n the bar
code system used is JAN 8,the printer prints the bar code after receiving 8 bytes
bar code data and processes the following data as normal data. The number of
data for ITF bar code must be even numbers. When an odd number of data is
input, the printer ignores the last received data.
[Notes for ②]
If is outside of the specified range, the printer stops command processing and
processes the following data as normal data.
[Notes for standard mode ]
If d is outside of the specified range, the printer only feeds paper and processes
the following data as normal data. If the horizontal size exceeds printing area,
the printer only feeds the paper. This command feeds as much paper as is
required to print the bar code, regardless of the line spacing specified by ESC 2
or ESC 3. This command is enabled only when no data exists in the print buffer.