User guide

all the characters on the line are aligned at the baseline. ESC E can also turn on

or off emphasized mode. However,the setting of the last received command is

effective. ESC -can also turn on or off underline mode. However, the setting of

the last received command is effective. GS !Can also select character size.

However, the setting of the last received command is effective.

[Default ] n=0

[Reference ]ESC -,ESC E,GS !

ESC-n

Turn underline mode on /off

Hex 1B 2D n

Decimal 27 45 n

[Range ] 0 ≤≤n ≤2,48 ≤n ≤50

[Description ] Turns underline mode on or off, based on the following value of n.

N Function

0.48 Turns off underline mode

1.49 Turns on underline mode(1-dots thick)

2.50 Turns on underline mode (2-dots thick)

[Notes ]

The printer can underline all characters (including right-side character

spacing),but cannot underline the space set by HT. The printer cannot underline

90 .clockwise rotated characters and white /black inverted characters. When

underline mode id turned off by setting the value of n to 0 or 48,the following data

is not underlined, and the underline thickness set before the mode is turned off

does not change. The default underline thickness is 1 dot. Changing the

character size does not affect the current underline thickness. Underline mode

can also be turned on or off by using ESC !. Note, however, that the last

received command is effective.

[Default ] n =0

[Reference ] ESC !

ESC 2

Select 1 /6-inch line spacing

Hex 1B 32

Decimal 27 50

[Notes ]

The line spacing can be set independently in standard mode and in page mode.

[Reference ]ESC 3