User guide

The buffer data is deleted after being printed. . The printing area set by ESC W is

reset to the default setting. The printer does not execute paper cutting. This

command sets the print position to the beginning of the line. This command is

enabled only in page mode.

[Reference ] ESC FF,ESC L,ESC S

Print and carriage return

Hex 0D

Decimal 13

[Description ] When auto-line feed is enabled, this command functions in the

same way as LF. When auto-line feed is disabled, this command is ignored.

[Notes ]

This command sets the print position to the beginning of the line.

ESC!n

Select print mode(s)

Hex 1B 21 n

Decimal 27 33 n

[Range ] 0 ≤n ≤255

[Description ] Selects print mode((s)using n as follows :

BIT

Off/On Hex Decimal Function

Off 00 0 Character font A(12x24)selected.

On 01 1 Character font B(9x17)selected.

1 - - - Undefined

2 - - - Undefined

Off 00 0 Emphasized mode not selected

On 08 8 Emphasized mode selected

Off 00 0 Double-height mode not selected

On 10 16 Double-height mode selected

Off 00 0 Double-width mode not selected

On 20 32 Double-width mode selected

6 - - - Undefined

Off 00 0 Underline mode not selected

On 80 128 Underline mode selected

Determine the values of n by adding the values of all the characteristics you want

to select.

[Notes ]

When both double-height and double-width modes are selected, quadruple size

characters are printed. The printer can underline all characters, but can not

underline the space set by HT,ESC $,or ESC＼or 90 degree clockwise rotated

characters. The thickness of the underline is that selected by ESC -,regardless

of the character size. When some characters in a line are double or more height,