User guide

WEB Connect for Pocket PC page 3
Tutorial
1. Enter your Merchant ID in to the Merchant ID text area.
The test account number is: 10600 or 10011
2. Enter your Serial Number into the Serial Number text area.
The serial number for either test account is: ser1234
3. Click on the Activate button.
This will result in a communication 'hop' to the Account Activation server. If your PDA device is not set
up properly, a message box will display the problem (i.e., connection not establish, serial port already
in use, batteries too weak for starting a wireless connection, IR port not open on your cell phone, etc.).
If communications are successful, a message box will request a name verification of your merchant
account.
4. If the Merchant Name is correct, click the Yes button.
This will send another request to the Account Activation server in order to valid the serial number.
The Merchant Name for test account 10600 is: Merchant Anywhere PRI Test Account
The Merchant Name for test account 10011 is: PRI Test Account
5. Click on the OK button.
Your account becomes activated and if you are using the
test account, a message box appears indicating that any
transactions processed will not actually occur. After
clicking on the OK button, you will then be brought to the
Log-On screen. Here you can add the appropriate
information to long into your account.
Note:
When starting the communication process, your Pocket PC may display
additional messages. the exact message you will see at this point will vary
from PDA to PDA.
It is also important that you have setup your Pocket PC correctly o that it
can automatically connect to the Internet. If you have not yet setup your
connection or need help in setting the correct parameters, please visit:
http://www.microsoft.com/mobile/pocketpc/software/connected.asp
ACCOUNT ACTIVATION