User guide

WEB Connect for Pocket PC page 1
WEB Connect Edition Tutorial
(Pocket PC Edition)
Welcome
Welcome to WEB Connect. This document is a step-by-step tutorial outlining the major features of WEB
Connect. Each tutorial takes under 10 minutes to perform. As such, it is recommended that you use these
tutorials along with your PDA.
Installing WEB Connect
Please follow the instructions below to install WEB Connect onto your Pocket PC.
In order to install PocketVerifier Professional, you most have downloaded or obtained the software installation
file WC_PPCInstall.exe.
Note:
It is assumed that you have already installed the Pocket PC Active Sync software that came with your Pocket PC and that you have
successfully performed a User or Guess Connection between your Pocket PC and the computer you are using to install this software. If not,
please consult the documentation that came with your Pocket PC device and set up your system before continuing with this installation. For
on-line documentation on how to set up your Pocket PC, please visit: http://www.microsoft.com/mobile/pocketpc/tutorials/
Installation
In order to install WEB Connect onto your device…
1. Place your Pocket PC into its cradle and establish communications with your computer.
If you are using a computer other than your own, you do not need to create a partnership; logging in
as a guess is sufficient for installing the software.
2. Locate WC_PPCInstall.exe
3. Double-click on this file.
The installation will start. Simply follow the directions located on the screen.
When the installation is complete, WEB Connect will be successfully installed onto your Pocket PC and
registered with the system.
Registering Booster
WEB Connect requires the Booster runtime to be installed on your Pocket PC. The above installation
automatically installs this runtime and allows for a 30 day evaluation period. To use this runtime after the 30
period, you are required to register at: http://www.appforge.com/booster.html