User guide

PAY@PC • User Guide and Tutorial • 2.00.0629.2009 page 52
Installing the Windows Generic Text Only Printer Driver
To install the Generic Text Only Driver in Windows XP, follow these steps:
1. Open the Control Panel.
2. Switch to Category View.
3. Pick the category: Printer and Other Hardware.
4. Pick the task: Add a Printer.
5. Click Next in the Add Printer Wizard.
6. Select Local Printer and turn off Automatic detection, then click Next.
7. Select the port you will be using (for example, if the printer in using a COM Port, select the correct
COM port from the list, otherwise select the LPT1 port), then click Next.
8. Select Manufacture: Generic and Printer: Generic / Text Only.
9. Click Next until the wizard is finished.
If the driver is already installed follow the recommended procedure.
You may also want to print a test sheet to make sure that the printer is attached and working correctly.
This procedure is similar in Windows Vista and Windows 7.