User manual

Performer | 13

Best Practices for MediaPOINTE Performer

A. When using the MediaPOINTE Performer in Multi Mode, always delete all key cards at the end of the night by

insertingthekeyCardintotheMediaPOINTEPerformerandpressingtheF1keyontheremote

B.ToCancelaRecodinginMultimode,presstheFFkeyonthefrontkeypadBEFOREtherecordinghasended.

C.Insinglemode;toskiptothenextrecordinginthequeue,PresstheFFonthefrontKeypadbefore

D. Powering down the system, should be done by double pressing the front power button. You should never pull

the power to avoid losing recorded content

E.IfaCondencemonitorisnotbeingused,connectthe75ohmconnecter(supplied)tothecompositeoutputof

the MediaPOINTE Performer

F.NeveruseKeycardsforanythingotherthanintendedusewiththeMediaPOINTEPerformer

G. Try and have MediaPOINTE Performer and Camera on same power strip.

H.IfyouswitchfromsinglemodetoMultimode,Makesureyoucancelallrecordingsbeforeyouswitchmodes.