User manual

8 | Performer User Manual 4.5 February 2011
5.DoublecheckMultiModeswitchwassuccessful.
Use one of the Flip open white MediaPOINTE Performer
KeyCard’sandinsertintothefrontUSBportofthe
MediaPOINTEPerformer.If“USBstickaccepted!”is
displayed, switch was successful.
• The MediaPOINTE Performer will stay in Multi Mode
even through power cycles. If you ever would like to
switchtoSingleModerepeatsteps1–4.
**IMPORTANT**TheKar.switchUSBis
the only way to change between the
twomodes(singleandMultiMode),
Please keep it in a dry safe place. If
you’reKar.switchUSBeverisLost,
stolen, or damaged, please visit www.
mediapointe.com or contact technical
support for a replacement.
3. Using the MediaPOINTE
Performer (Multi Mode)
• Turn the MediaPOINTE Performer on by pushing the
powerbuttononthefrontpanel.Power-uptakes50~60
seconds to complete.
oBoot-upisindicatedbyanorangeLED
o When the MediaPOINTE Performer is ready, the blue
LEDonthefrontpanelwillbeonsolid,andyouwillsee
your video source on the monitor.
• Adjust the camera as desired.
•FlipopenthewhiteMediaPOINTEPerformerKeyCard
andinsertintothefrontUSBportoftheMediaPOINTE
Performer.TheKeyCardacceptanceisbetween3~5
secondsindicatedby“USBstickaccepted!”displayed,
followed by a “swoosh” sound.
oAnidentierisnowplacedontheKeyCard.Any
subsequent recordings that are started with this
KeyCardinplace,willbeassociatedwiththisKeyCard
•Tostartarecording,pushtheRECbuttononthe
front panel membrane switch.
o You will see a record icon and the record message
“Nowrecording:/DVD_xxxxx”onthemonitor.Thered
LEDonthefrontpanelwillalsobeilluminated.
o If you wish to cancel the recording and not have the
recordingassociatedwiththeKeyCard,presstheright
arrowbuttononthefrontpanel(>>)beforeyoustop
therecording.Themessage“Cancelledrecording:/
DVD_xxxxx”willbedisplayed.
•Tostoprecording,pushthedownarrow/squareicon
key on the front membrane switch.
o Once you’ve stopped the recording, the message
“Donerecording:/DVD_xxxxx”willbedisplayed.
oAtthispointyoumayremovetheKeyCard
•ToburnallrecordingassociatedtoaKeyCard:
1.InsertKeyCardintothefrontUSBportofthe
MediaPOINTEPerformer.Acceptancetakes3~5
seconds.“USBstickaccepted!”isdisplayed,followed
by a “swoosh” sound.
2.InsertablankDVD-RorDVD+Rdiscintotheoptical
drive.Discacceptanceisbetween20~25secondsandis
indicated by a “swoosh” sound
3. After the “swoosh” sound the MediaPOINTE
Performer will queue up all associated recordings and
willstarttoburntothedisc.“Nowburningdvd..(X)”
willbedisplayedandtheredLEDonthefrontpanel
willblink.Itisimportanttonotethat“(X)”willbethe
quantityofrecordingsassociatedwiththatKeyCardand
burn to the disc.
4. When the burn process is complete, the disc will
be ejected, accompanied by a “swoosh” sound. The
message“Thedvdisready…(X)”willbedisplayed.
5.IfyouwouldliketoburnanotherDVD,repeatsteps
1-4
•TheMediaPOINTEPerformeriscapableofrecording/
burning and processing at the same time, so you do not
have to wait for the burn to be completed before you
start the next recording.
•TodeleteallrecordingassociatedwiththeKeyCard.
It is important to note that it is highly recommended for this
to be done at the end of the night or before MediaPOINTE
Performer is powered down.
1.InsertKeyCardintothefrontUSBportofthe
MediaPOINTEPerformer.Acceptancetakes3~5seconds.
“USBstickaccepted!”isdisplayed,followedbya
“swoosh” sound.
2.Usingthesuppliedremote,presstheF1key.
“Erasing all content for this stick..” will be displayed,
followed by “Done…” when the process is completed.
It is important to note that it is highly recommended
for this to be done at the end of the night or before
MediaPOINTE Performer is powered down.
OnceaDVDdischasbeenburnedyoucannotwrite
to it again; you must insert a fresh blank disc. The
maximum duration that can be recorded and burned to
asingle-layerdisc(DVD-RorDVD+R)isapproximately
60minutes.TheMediaPOINTEPerformercanalsoburn
to Dual-layer discs. The maximum recorded duration
foradual-layerdiscisapproximately120min.Ifthe
recorded material is too big for the disc to handle, the
discwillbeejected“Burnfailed(156):/DVD_xxxxx”
will be displayed.
Allburneddiscswillhaveanauto-playDVDformatle
oftheperformance,andadigitalMp4lethatcanbe
saved to your PC.