User manual
6 | Performer User Manual 4.5 February 2011
“Donerecording:/DVD_xxxxx”willbedisplayed.
• The MediaPOINTE Performer will automatically
start to process the last recording. The message “Now
processingDVD:/xxxxx”willbedisplayed.
o When the processing is done the burning process will
start automatically if there is a blank disk in the drive.
If there is not a disc in the drive the MediaPOINTE
Performer,themessage“pleaseenteradiscfor:/DVD_
xxxxx” will be displayed.
o While the disc is being burned, the message “Now
burning:/DVD_xxxxx”willbedisplayedandtheredLED
on the front panel will blink. When the burn process is
complete, the disc will be ejected, accompanied by a
“swoosh”sound.Themessage“Pickup:/DVD_xxxxx”
will be displayed.
• At this point the MediaPOINTE Performer will
continue burning multiple copies of the last recording,
just insert another disc. If you wish to stop the current
leinthequeuefrombeingburned,pushtheright
arrowbuttononthefrontpanel(>>).Themessage
“Burningcancelled:/DVD_xxxxx”willbedisplayed.
oTheMediaPOINTEPerformeriscapableofrecording/
burning and processing at the same time, so you do not
have to wait for the burn to be completed before you
start the next recording. The MediaPOINTE Performer
will queue all recording in order, so simply press the
rightarrowbutton(>>)toburnthenextrecordingin
the queue
All recorded content will be burned in the order that
itwascreated.OnceaDVDdischasbeenburnedyou
cannot write to it again; you must insert a fresh blank
disc. The maximum duration that can be recorded
andburnedtoasingle-layerdisc(DVD-RorDVD+R)is
approximately60minutes.
The MediaPOINTE Performer can also burn to Dual-layer
discs. The maximum recorded duration for a dual-layer
discisapproximately120min.Iftherecordedmaterial
is too big for the disc to handle, the disc will be ejected
“Burnfailed(156):/DVD_xxxxx”willbedisplayed.
Allburneddiscswillhaveanauto-playDVDformatle
oftheperformance,andadigitalMp4lethatcanbe
saved to your PC.