Specifications

62 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 63
Weight 165 g
Operating
Temperature
0ºC — 45ºC (32ºF — 113ºF)
Storage
Temperature
-10ºC — 60ºC (-14ºF — 140ºF)
Maximum
Humidity
95% (non-condensing)
Environmental IP65 (with cable or protection cap attached to all connectors, front cover
properly installed)
Vibration EN61373 including IEC 60068-2-6,60068-2-64 6.4, and 60068-2-27
RS-232 RxD, TxD according to TIA/EIA-232-F
Codes Data Matrix
TM
(IDMax: ECC 0, 50, 80, 100, 140, and 200; IDQuick:
ECC200)
QR Code and microQR Code
UPC/EAN/JAN
Codabar, Interleaved 2 of 5, Code 39, Code 128, and Code 93, Pharma,
Postal, RSS/CS, PDF 417, MicroPDF 417
Discrete I/O
operating limits
Trigger,
HS
Output
0,1,2,3
Max output current: 50 mA @ 26.4 VDC
Output load: 470 Ω @ 24 VDC; 150 Ω @ 12 VDC
Input voltage limits:- 28 VDC — +28 VDC
Input current: 4.2 mA @ 24 VDC; 2.0 mA @ 12 VDC
Power Supply
Requirements
24V Maximum power: 5W (internal illumination)
18W (internal + external lights)
DataMan 300 Series Specications
i
NOTE: For product support, contact http://support.cognex.com
CAUTION: IP protection is ensured only when all connectors are attached
to cables or shielded by a sealing cap.
Warnings and Notices
LASER LIGHT, DO NOT STARE INTO BEAM: CLASS 2 LASER PRODUCT
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE SERIOUS
INJURY
• CAUTION - Use of controls or adjustments or performance of procedures other
than those specied herein may result in hazardous radiation exposure.
• Do not attempt to service or repair this product -- return it to Cognex for
service.
• Do not permit anyone other than Cognex Corporation to service, repair, or
adjust this product.
• Do not attempt to open or modify this device except as described in this
document.
• Do not direct or reect laser light toward people or reective objects.
• Do not operate this device if it is damaged or if the covers or seals are missing
or damaged.
This Laser Product is designated as Class 2 during all procedures of
operation.
Wavelength 650 nm
Laser Power for classication < 1 mW
Beam Diameter < 3mm at aperture
Divergence < 1.5 mrad