Specifications

1
2
3
4
5
54 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 55
Training Feedback
The second LED from left on the reader
glows green to indicate that it is currently
trained, or yellow to indicate that it is not
trained.
Connect the reader to the Setup Tool to
untrain it and allow it to recognize other
enabled symbologies.
Incremental Training for Multiple Symbologies
If you want to train the reader to recognize multiple symbologies, you can
present a single image showing all the desired symbologies and perform the
training procedure previously described.
If you cannot present a single image showing all the necessary symbologies,
you can enable incremental training on the Training tab of the Symbology
Settings pane:
With incremental training enabled, you can train the reader using multiple
images showing the symbologies you expect to decode. The reader will train
each new symbology while retaining the existing trained symbologies.
Training the Reader (Continued)
External Light Control
A 4-pin cable is provided for the external light
control.
Pin # Signal Name Wire Color
1 Vout24 white
2 Brightness Control brown
3 VoutRTN black
4 Strobe blue
5 Chassis not connected
The above drawing shows
the socket on the device.