Specifications

5. Go to the Displayed Image Settings pane and change the Images to
Use according to what you want to see on Live Display: the original or the
ltered image.
6. You can compare the original and ltered results on the Results Display if
you choose the images from the Read Result History.
52 DataMan 300 Quick Reference Guide DataMan 300 Quick Reference Guide 53
Training the Reader
Training your reader with the expected symbology can make the time
required to decode successive symbols more consistent. In addition,
training may help increase decode yield.
To train your reader, place a code in front of the reader and do one of
the following:
• Press and hold the trigger button for a
minimum of 3 seconds.
• Click and hold the trigger button in
the Setup Tool for a minimum of 3
seconds.
• Click Train Code in the Results Display pane.
You can use training in Single, Burst, Continuous or Self trigger modes.
NOTE that only a single symbol of each symbology kind can be trained.
DataMan 300 Series Image Filtering
(Continued)
The example images
were taken using the
Equalize lter.