Specifications

86 Maintaining and Troubleshooting Your E-4200 System
Memory errors were
detected while the sys-
tem powered up.
See “Memory errors were detected during
system start up.” on page 74.
Memory size error. Enter BIOS Setup and save the memory
configuration.
Non-system disk or disk
error.
•
Eject the diskette and press
E
NTER
.
•
If the diskette is bootable, check it for
errors.
Not enough memory. Close all programs that are not currently in
use.
Print queue is full.
•
Wait until the current print job has
completed before sending another print job.
•
If you receive this error often, you need to
add memory to the printer.
Printer is out of paper.
•
Add paper to the printer.
•
Make certain the printer is online.
Required parameter
missing.
•
Make certain you entered the right
command.
•
If you are trying to exit MS-DOS to return to
Windows, type
exit
and press
E
NTER
.
Syntax error.
•
Make certain you entered the right
command.
•
If you are trying to exit MS-DOS to return to
Windows, type
exit
and press
E
NTER
.
Time and date not set. Enter BIOS Setup to set the system’s date
and time.
Write protect error. Move the write-protection tab over the hole
on the back of the diskette.
Error Message Solutions