Specifications

System Components 21
Setting the jumpers
The system board jumper (J7B1) lets you clear passwords, set the
processor/bus speed, and recover the BIOS. The table below shows the
settings required to perform those tasks, and the following text provides
step-by-step instructions for each mode.
The following figure shows the location of the jumper on the system board.
J7B1 Mode Jumper Setting Action When Set
Normal 1-2 Normal operation
Configure 2-3 Adds a Maintenance
menu to Setup utility with
options to clear
passwords and set
processor/bus speeds
Recovery No jumper Causes system to
attempt BIOS update or
recovery from diskette
Important!
Some processors are
designed so that your
system can automatically
detect the processor speed.
For other processors, you
must manually enable the
system to detect the
processor speed. See
page 27 for more
information.
1
3
J7B1