Service manual

Chapter 2: Using Your System 21
♦ Position the cursor on the item and hold down the left button while
sliding your finger to reposition the cursor, then release the button
♦ Position the cursor on the item and tap on the pad twice. After the
second tap, hold and slide (without lifting your finger) to reposition
the cursor, then lift your finger to release.
Customizing the EZ Pad
You can customize the EZ Pad to work the way you want when you set
button configuration, drag, and edge motion or cursor speed, rate, and size.
1. Click on Start, Settings and Control Panel.
2. Double-click on the mouse icon.
3. Click on each of the different tabs to see the options available.
Using an External Mouse or
Keyboard
You can attach an external mouse or keyboard to the notebook using the PS/2
port, the USB port, or the serial port. The optional docking stations also have
ports for external connections.
It is not necessary to shut down the system to connect an external PS/2
mouse or keyboard. Just connect it to the port and start to work.
To customize the EZ Pad