Full Product Manual

The Underhood Light Series are versatile lights for use in automotive repair, construction, industrial
and many other applications. These SMD LED lights provide 75% more luminescence compared to
traditional fluorescent lights.
Using Instructions
V1/DW
ADVANCED LIGHTING SYSTEMS
Warranty
Warranty for 2 years from the original purchase date.
THIS WARRANTY DOSE NOT COVER BATTERY OR ACCESSORIES NOR DEFECTS OR DAMAGES TO THE LIGHT
(I) after the warranty period expires; (II) resulting from misuse or abnormal operation; (III) resulting from a failure to
properly maintain or operate the tool; or (IV) resulting from any repair or maintenance services performed by any party
other than ALS.
Warnings and Cautions
• Please read and understand this instruction carefully to ensure the safe and effective use of this light. And follow all
directions before using.
• Risk of electrical shock, do not use in the environment with gas, combustible or explosive materials, hot objects.
• Keep away from the reach of children.
• Do not open, repair or modify.
• Do not use the light with wet hand.
• Use only under the recommended voltage and frequency requirements.
• To avoid the harm to your eyes, please do not look straight to the light.
• Minimum distance from lighted objects 0.1m.
• Please use correct charger to charge the light.
• The specification in this manual is based on standard lab testing, different environment may influence the data.
• Charge this light every 3months if not in constant using, and after each use, if it is used often to ensure longevity.
• Replace the battery with manufacture and battery designation only.
• Before using assemble two hooks to each side of the bar by supplied hexagon wrench, make sure the screw is locked firmly.
• Plug the charger into any 100-240V AC standard power source to let the unit fully charged until the green indicator on the
charger light on.
• Press the switch continuously for changing steps of light sources (cyclic steps: dim-bright-off).
Replace the battery pack for UHL201R:
• Simply press the button on the handle and pull out the battery pack, replace another one and push it back, you will hear a click
sound means it successfully attached.
Dual Fuel System (for model UHL201H)
• Bar extends from 47” to 79”
• Coated brackets prevent scratches on car surfaces
• Detachable battery pack for charging (for model UHL201R)
• Light can swivel 360 degree on the bracket
• Drop impact resistant
• The light will flash as a low power warning prior to the battery running out
• Use with cable or rechargeable Li-ion battery
Multi-functional Design
UHL201R&UHL201H
Brightness Memory Function
• Setting is recorded after 5 seconds of activation
• Recorded setting is recalled next time the device is activated