TM AdvancedFrame™ Convertible Inflatable Kayak Owner’s Manual MODEL AE1007 PATENTED 1 OR 2 PERSON KAYAK IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING. AFTER READING THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ADVANCED ELEMENTS, INC.
TM technology inflatable kayaks with cutting edge INTRODUCTION It is our goal, at Advanced Elements, to develop new and unique paddlesports products that enhance our customers’ outdoor experience. Our focus is on designing and manufacturing “Inflatable kayaks with cutting edge technology”. Our kayaks incorporate many different materials and components and deliver high performance at a very reasonable price.
TABLE OF CONTENTS 1. Caution/Safety................................................................... 4 1.1 Boating Safety......................................................... 5 2. Specification....................................................................... 6 2.1 Capacity.................................................................. 6 2.2 Features................................................................... 6 3. Assembly/Inflating/Deflation Instruction..................... 7 3.
TM 1. CAUTION - SAFETY WARNING Users of this product agree by their use to accept the inherent risks involved in this paddlesports activity and agree to follow all instructions, cautions, and warnings carefully before using this Kayak. (PLEASE READ CAUTION STATEMENT CAREFULLY) CAUTION SAFETY WARNING PADDLESPORTS CAN BE VERY DANGEROUS AND PHYSICALLY DEMANDING. THE USER OF THIS PRODUCT SHOULD UNDERSTAND THAT PARTICIPATION IN PADDLESPORTS MAY INVOLVE SERIOUS INJURY OR DEATH.
AdvancedFrame™ Convertible Inflatable Kayak Owner’s Manual 1.1 Boating Safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER WARNING CAUTION CAUTION NOTICE Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury or substantial property damage.
TM 2. SPECIFICATION Dimensions: Length: 15’ Width: 34” Weight: 56 lbs (25 kg) Max. Person Capacity: 500 lbs (227 kg) Max. Persons & Gear Capacity: 550 lbs (249 kg) Recommended Pressure: Main chambers: 2.0 psi (0.14 bar) Floor chamber: 1.0 psi (0.07 bar) 2.1 Capacity The person/load capacity is determined by the availability of proper seating on the kayak.
AdvancedFrame™ Convertible Inflatable Kayak Owner’s Manual OPTIONAL DECKS: Attach the optional Single Deck or Double Deck kit (sold separately) to create a closed deck kayak with the option for using a spray skirt. Three seating positions allow for maximum versatility. Single Double 3. ASSEMBLY/INFLATING/DEFLATION INSTRUCTION The AdvancedFrame™ Kayak has a rigid frame in the bow and stern that enhances its performance. 3.1 Assembly The illustration below shows the general assembly of the kayak.
TM 1. Your AdvancedFrame™ kayak comes from the factory pre-assembled however should you take it apart you will need to insert the aluminum Bow Rib and the Stern Rib into the webbing slots on the cover of the AdvancedFrame™ tube (while deflated). 2. Place the AdvancedFrame™ (with Ribs installed), into the Outer Skin, making sure that the air valve is upright and at the back of the boat, and lined up with the opening on the outer cover. 3.
AdvancedFrame™ Convertible Inflatable Kayak Owner’s Manual provide enough pressure to fully inflate the kayak, so you will need a secondary pump to finish the job. Using the NEW “Screw-on” Spring Valve Adaptor: The screw-on Spring Valve Adaptor was designed to enable the pump hose to securely connect to the Advanced Elements Spring Valve without falling off during inflation, making inflation easier.
TM Diagram of Inflation Chambers 3.3 Inflating IMPORTANT: Before inflating, check to be sure that the kayak is completely assembled. Inflate your kayak in the following order. Failure to follow these instructions may cause damage to your kayak. Do not over inflate. 1. Partially inflate chamber 1 until the kayak begins to fill out or appears to be half way inflated then close cap. Check to be sure the valve is in the inflate position (See Figure 1). 2. Proceed to chamber 2.
AdvancedFrame™ Convertible Inflatable Kayak Owner’s Manual Figure 3. Plastic Bow and Stern Insert INFLATION TIPS Use either a bellows style foot pump or two-way hand pump to inflate to your kayak. Be sure that the fitting on the pump hose fits snug in the valve on the kayak. NEVER USE COMPRESSORS, CO2, OR COMPRESSED AIR AS THEY MAY DAMAGE YOUR KAYAK. The main chambers use high-end military style, plunger valves (See Figure 1). 3.
TM 2. Remove plastic Bow and Stern forms and seats then lay kayak out flat. Remove optional single or double deck if attached. 3. Fold in half, down the center. 4. Fold into 5 equal sections. 4. Place into duffel bag. 4. GUIDELINES FOR USAGE Paddlesports can be very dangerous and physically demanding. The user of this product should understand that participation in paddlesports may involve serious injury or death. Observe the following safety standards whenever using this product.
AdvancedFrame™ Convertible Inflatable Kayak Owner’s Manual Most areas have local laws and regulations about the use and equipment of small boats. Usually a phone call to the local authorities will provide you with the needed information. Some areas may require that you register and display a registration number on the front of your kayak. Once you have been issued a number, it is best to affix it to the kayak by printing it on the material with a permanent ink marker.
TM 5. If there is sand or gravel in the kayak, you can hose out the cover, and then wipe it down with a towel. 6. Most of the time you can just pull out the inflatable floor and wipe out the inside of the kayak absorbing most of the water, then pack it up. 6. REPAIRS All kayaks come with a repair kit that includes glue and several patches. This should remain with the kayak in the event that you may need it. If service is required for your kayak, please call 866-262-9076 for assistance.
AdvancedFrame™ Convertible Inflatable Kayak Owner’s Manual PROBLEM Kayak still loses air. SOLUTION If you have checked all the previous possible reasons for the kayak losing air, then there may be a pinhole or a puncture somewhere on the tube. Pull tube from outer covers. Inflate. If you cannot see or hear where a leak may be, take a clean rag with soapy water and begin rubbing the tube. If a hole is present, bubbles will continually form. Repair using repair kit.
PADDLING NOTES: It is alway a good idea to keep nots of your paddling experiences. Your notes can serve as a reminder of what to look out for, as well as what gear to bring along, and what conditions are like.
Note: If your state requires the licensing of this boat, please use the form below. If you need any assistance filling out this form, please contact Advanced Elements Customer Service Department.
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufacturer’s Name: Advanced Elements, Inc. Manufacturer’s Address: P.O.
LIMITED WARRANTY Advanced Elements, Inc. warrants this product to be free from defects in material or workmanship for a period of one year from the date of purchase. Products that prove to be defective under conditions of normal and proper use during the warranty period because of defective workmanship or faulty material will be replaced or repaired without charge. For warranty service, contact Advanced Elements, Inc.
IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING. AFTER READING THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. If you would like a catalog of our latest products please visit our website at www.advancedelements.com or call Toll Free 866-262-9076 PLEASE COMPLETE THE OTHER SIDE OF THIS WARRANTY REGISTRATION CARD AND RETURN TO ADVANCED ELEMENTS, INC. PLACE STAMP HERE TM P.O. Box 5128 Concord, CA 94524 1-866-262-9076 www.advancedelements.com Email: info@advancedelements.
