TM StraitEdge™ Inflatable Kayak Owner’s Manual MODEL AE1006 PATENTED 1 PERSON KAYAK IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING. AFTER READING THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ADVANCED ELEMENTS, INC.
TM technology inflatable kayaks with cutting edge INTRODUCTION It is our goal, at Advanced Elements, to develop new and unique paddlesports products that enhance our customers’ outdoor experience. Our focus is on designing and manufacturing “Inflatable kayaks with cutting edge technology”. Our kayaks incorporate many different materials and components and deliver high performance at a very reasonable price.
TABLE OF CONTENTS 1. Caution/Safety................................................................... 4 1.1 Boating Safety......................................................... 5 2. Specification....................................................................... 6 2.1 Capacity.................................................................. 6 2.2 Features................................................................... 6 3. Assembly/Inflating/Deflation Instruction..................... 7 3.
TM 1. CAUTION - SAFETY WARNING Users of this product agree by their use to accept the inherent risks involved in this paddlesports activity and agree to follow all instructions, cautions, and warnings carefully before using this Kayak. (PLEASE READ CAUTION STATEMENT CAREFULLY) CAUTION SAFETY WARNING PADDLESPORTS CAN BE VERY DANGEROUS AND PHYSICALLY DEMANDING. THE USER OF THIS PRODUCT SHOULD UNDERSTAND THAT PARTICIPATION IN PADDLESPORTS MAY INVOLVE SERIOUS INJURY OR DEATH.
StraitEdge™ Inflatable Kayak Owner’s Manual 1.1 Boating Safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER WARNING CAUTION CAUTION NOTICE Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury or substantial property damage.
TM 2. SPECIFICATION Dimensions: Length: 9’11” Width: 35” Weight: 34 lbs (15 kg) Max. Person Capacity: 300 lbs (136 kg) Max. Persons & Gear Capacity: 300 lbs (136 kg) Recommended Pressure: Main chambers: 2.25 psi (0.16 bar) Floor chamber: 1.0 psi (0.07 bar) Bow/Stern air bag: 1.0 psi (0.07 bar) 2.1 Capacity The person/load capacity is determined by the availability of proper seating on the kayak.
StraitEdge™ Inflatable Kayak Owner’s Manual Bow and Stern Design The bow and stern have removable ribs of high grade aluminum. When the chambers are inflated these ribs press against the outer cover and form a high performance bow and stern. 3. ASSEMBLY/INFLATING/DEFLATION INSTRUCTION The StraitEdge™ Kayak has a rigid frame in the bow and stern that enhances its performance. 3.1 Assembly 1.
TM 3.2 Understanding Your Valves Advanced Elements StraitEdge™ kayak uses the following valves. The Advanced Elements spring valve has the function and durability of other military type valves and is compatible with most standard pumps. The lock nut holds the valve in place with the cover for easy inflation. The following figures will have details on how to operate the valves. To Inflate: The valve’s plunger stem should be in the up/outward position flush with the valve threading.
StraitEdge™ Inflatable Kayak Owner’s Manual Special Note: The Spring Valve Adaptor comes with all current Advanced Elements pumps, with the exception of the 12v inflator, and will attach to any Advanced Elements pump that does not have the adaptor already included, with the exception of the 12v inflator. The Spring Valve Adaptor will also attach to some other manufacturer’s pumps, but you must check the attachment style at the end of the pump hose to be sure it will fit. Figure 1.
TM Diagram of Inflation Chambers 3.3 Inflating IMPORTANT: Before inflating, check to be sure that the kayak is completely assembled. Inflate your kayak in the following order. Failure to follow these instructions may cause damage to your kayak. Do not over inflate. 1. Locate chamber 1. Unscrew cap and check that plunger valve is in the inflate position. Inflate Chamber 1 until firm to the touch (2.25 psi ONLY). 2. Proceed to chamber 2. Inflate chamber 2 until StraitEdge™ tube is firm to touch (2.
StraitEdge™ Inflatable Kayak Owner’s Manual 3.5 Deflation 1. Remove the caps from chamber 1, 2, 4 and 5. 2. Push valve stems inward and rotate to deflate position. 3. Unscrew valve body to chamber 3 (See Figure 2). 4. Once the chambers are deflated you can use your pump to vacuum out any additional air to improve folding 3.6 Folding NOTICE: Reverse your pump to completely deflate all chambers. 1. Completely deflate all air chambers and thoroughly dry the kayak and remove the seat. 2.
TM Most areas have local laws and regulations about the use and equipment of small boats. Usually a phone call to the local authorities will provide you with the needed information. Some areas may require that you register and display a registration number on the front of your kayak. Once you have been issued a number, it is best to affix it to the kayak by printing it on the material with a permanent ink marker.
StraitEdge™ Inflatable Kayak Owner’s Manual 5. PROPER CARE AND STORAGE Your inflatable kayak is made of very durable materials. However, like anything else, proper use and care will increase the life of your kayak. Before storing your kayak, make sure it is both CLEAN and DRY. You may clean your kayak with a mild soap and water. NEVER use strong solvents to clean your kayak as they will destroy the material. NEVER unzip the chamber cover when the kayak is inflated.
7. TROUBLESHOOTING 14 PROBLEM Does not hold air while inflating. SOLUTION The spring valve uses a plunger system. The only time the plunger should be in the open position is when you are deflating. Make sure that the plunger is closed to inflate. Push the plunger in and rotate counter-clockwise. The kayak is sagging or under inflated. Be sure that the right pump is being used. You need a bellows foot pump or a double action hand pump.
PADDLING NOTES: It is alway a good idea to keep nots of your paddling experiences. Your notes can serve as a reminder of what to look out for, as well as what gear to bring along, and what conditions are like.
NOTES: 16
Note: If your state requires the licensing of this boat, please use the form below. If you need any assistance filling out this form, please contact Advanced Elements Customer Service Department.
Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufacturer’s Name: Advanced Elements, Inc. Manufacturer’s Address: P.O.
LIMITED WARRANTY Advanced Elements, Inc. warrants this product to be free from defects in material or workmanship for a period of one year from the date of purchase. Products that prove to be defective under conditions of normal and proper use during the warranty period because of defective workmanship or faulty material will be replaced or repaired without charge. For warranty service, contact Advanced Elements, Inc.
IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING. AFTER READING THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. If you would like a catalog of our latest products please visit our website at www.advancedelements.com or call Toll Free 866-262-9076 PLEASE COMPLETE THE OTHER SIDE OF THIS WARRANTY REGISTRATION CARD AND RETURN TO ADVANCED ELEMENTS, INC. PLACE STAMP HERE TM P.O. Box 5128 Concord, CA 94524 1-866-262-9076 www.advancedelements.com Email: info@advancedelements.
