Specifications

General Intormation
Multi-user System
-SUPER QUAD or SUPER SIX (optional)
-One SUPER SLAVE (4 MHz or 6 MHz)
-48 TPI Floppy Disk Drive
-10 Mb Hard Disk w/Controller
5Mb removable/5Mb tixed
-TurboDOS
1.3 Purpose ot Manual
This manual has been designed to supply the intorrnation needed by
the stand-alone or multi-tasking user to install, contigure and
operate the SUPER STAR. Intormation is also provided tor
identitying and then isolating the problem, it it should occur,
to determine it the problem can be solved simply by the user or
it it must be retered to a qualitied service organization. The
manual has been written at a system level (i.e., the complete
SUPER STAR) and does not attempt to discuss specitic design
characteristics ot individual modules or the operating system
sottware within the system. That intor~ation is contained in
individual manuals also supplied with the SUPER STAR system.
1.4 Bow The Manual Is Organized
This manual is organized into seven sections and tive Appendices.
The subjects covered by each section and appendix are listed
below:
Section
1,
Section
2,
Section
3,
Section
4,
Section
5,
General Intormation - Intormation to the SUPER
STAR
and this manual.
SUPER STAR Physical Description - Explanation
ot the tront panel, rear panel and internal
layout.
Intertace Connectors - Description ot 1/0 ports
and associated connectors as well as
contiguration considerations.
System Specitications - SUPER STAR
specitications at a system and module level.
Instalation and Initialization - Intormation
on setting up and initializing the SUPER
STAR.
Also intormation on copying system
diskettes and the system hard disk.
Section 6, Operating System - How the Operating system
(CP/M and TurboDOS) are structured and used.
Section 7, List ot Recommended peripherals and Sottware -
Recommended CRT'S, printers and application
sottware packages.
Section 8, Problem Isolation - How to isolate a problem
with the SUPER STAR and what action to take.
1-2