Specifications

Problem Isolation
8.4 Look At The Symptoms (continued)
Table 8-1. Problem Symtpoms ~nd Solutions (continued)
Symptom
B. SUPER STAR
will not boot
CP/M 2.2 trom
tloppy disk
atter second
attempt.
C. SUPER STAR
won't boot
CP/M 3.~ trom
the cartridge.
Possible Cause
1. Diskette loaded
into drive wrong.
2. Diskette has
been damaged by
mishandling.
3. Diskette drive
has tSiled.
1. You did not
tollow procedures
tor booting CP/M
3.0
2. Cartridge has
been loaded into
hard disk drive
improperly.
8-3
Corrective Action
1. Reter to Appendix A
it you have any
doubt about how to
handle tloppy diskettes.
2. Reter to Appendix A
so as not to repeat
whatever may have
caused damage to the
diskette. Then,
locate the master
CP/M 2.2 tloppy
diskette shipped
vi i th the SUPER
STAR and reboot
(You were supposed
to make a copy see
Section 5). It this
diskette won't boot
either, look at
Possible Cause 3.
3. Contact nearest
SUPBR STAR service
center or distributor.
1. Read Section 5,
paragraph 5.1 entitled,
Installation Procedure.
The SUPER STAR must be
operator "torcea" to boo
CP/M 3.0 trom the
cartridge.
2. Read Section 5 tor
cartridge installation
procedures.