Specifications

The Operating System
6.7.6 Copying Diskettes to Cartridge (continued)
NOTE
The system must already be running ~rior to loading
the source diskette into the tloppy disk drive.
It this is Dot done, the system attempts to read
the operating system trom the tloppy disk which will
cause an error it it is not a system disk.
2. The logon message is displayed and the TurboDOS command
prompt is displayed:
OA} Where A is the tixed disk. The system assigns A to
the tixed disk when the system is booted tronl the
tixed disk. The system assigns the tloppy disk as
drive C and cartridge disk as B.
3. Use the COPY command to copy allot the tiles trom your
source diskette to cartridge disk:
OA}COPY C: B:;N[RETURN]
4. Following this command, each tile name is listed to the
display as it is copied.
This completes the copy procedure. Remove the tloppy trom the
drive. Store this away in a sate location in case it is ever
needed.
6.8 Error Message Summary
This section provides a briet list and explanation at the more
common error messages which may be displayed when using the two
operating systems, CP/M and TurboDOS. A complete list and
explanation ot error messages is provided in the two operating
system user's manuals.
6-25