Specifications

The Operating System
6.7.5 Copying Diskette to Fixed Disk (continued)
1. Insert a t10ppy disk containing the data you want to save or
copy into the tloppy disk drive it you have not already done so.
NOTE
The system must already be running prior to loading
the source diskette into the tloppy disk drive.
It this is not done, the system attempts to read the
operating system trom the tloppy disk which will
cause an error it it is not a system disk.
2. The TurboDOS command prompt is displayed:
OAl
3. Use the COpy command to copy all it the tiles trom your
source diskette to the tixed disk:
OA}COPY C: A:jN[RETURN]
4. Following this command, each tile name is listed to the
display as it is copied.
This completes the copy procedure. Remove the tloppy trom the
drive. Store this tloppy away in a sate location in case it is
ever needed.
6.7.6 Copying Diskettes to Cartridge
This section describes the procedure tor copying data stored on
diskette to the cartridge portion at the 10Mb hard disk drive.
It it is necessary to create a backup system diskette read
Section 5.3 ot this manual. The TurboDOS operating system
designates the cartridge disk as drive B and the tixed portion ot
the tixed drive as drive A when the system is booted trom the
tixed disk.
To copy a diskette to the cartridge disk, proceed as tallows:
1. Insert a tloppy disk containing the data you want to save or
copy into the tloppy disk drive it you have not already done so.
6-24