Specifications

The Operating System
6.7.3 Copying Cartridge to Diskette (cqntinued)
6. Use the COpy command to copy allot the tiles trom your
source cartridge to the destination:
OA}COPY A: C:iN[RETURN]
7. Following this command, each tile name is listed to the
display as it is copied.
This completes the copy procedure.
6.7.4 Copying Cartridge to Fixed Disk
This section describes the procedure tor copying data trom the
cartridge to tixed portion ot the hard disk drive.
To copy the cartridge disk, proceed as tollows:
1. Insert the cartridge to be copied into the hard disk drive it
you have not already done so.
2. Power
hard drive.
up the hard drive by pressing the run button on the
Wait tor the drive to come up to operating speed.
3. Use the COpy command to copy allot the tiles trom your
source cartridge to the tixed disk:
OA}COPY B: A:iN[RETURN]
4. Following this command, each tile name is listed to the
display as it is copied.
This completes the copy procedure.
6.7.5 Copying Diskettes to Fixed Disk
This section describes the procedure tor copying data stored on
diskette to the tixed disk portion ot the 10Mb hard disk drive.
It it is necessary to create a backup system diskette read
Section 5.3 ot this manual. The TurboDOS operating system
designates the cartridge disk as drive B and the tixed portion ot
the tixed drive as drive A when the system is booted trom the
tixed disk.
To copy a diskette to the tixed disk, proceed as tollows:
6-23