Specifications

The Operating System
6.7.1 Copying Fixed Disk to Diskette (continued)
3. The logon message is displayed and the TurboDOS command
prompt is displayed:
OA} Where A is the tixed disk. The system assigns A to
the tixed disk when the system is booted trom the
tixed disk. The system assigns the tloppy disk as
drive C and cartridge disk as B.
4. Enter the command, FMTWD5 C:i2DT4. This command tormats the
diskette currently installed in the tloppy disk drive. TurboDOS
assigns the tloppy disk drive C.
OA}FMTWD5 C:i2DT4[RETURN)
Insert disk to be tormatted in drive C
Enter <CR) to begin tormatting.
5. The system tormats the diskette installed in the tloppy disk
drive and displays the tollowing message:
Format complete
6. Use the COPY command to copy allot the tiles trom your
source diskette to the destination:
OA}COPY A: C:iN[RETURN]
7 • Following th is command, each tile name is listed to the
display as it is copied.
This completes the copy procedure. Remove the copy and store
this tloppy away in a sate location until it is needed.
6.7.2 Copying Fixed Disk to Cartridge
This section describes the procedure tor copying data trom the
hard disk to a cartriddge disk.
To copy the tixed disk to a cartridge, proceed as tollows:
1. Power up the system it it is not already running. The
operating system is assumed to be currently loaded on the tixed
portion ot the hard disk drive.
6-21