Specifications

The Operating System
6.5.3 Copying Cartridge to Diskette (continued)
3. The logon message is displayed and the CP/M command prompt is
displayed:
A) - Where A is the tixed disk. The system assigns A to the
tixed disk when the system is booted trom the tixed
disk. The system assigns the tloppy disk as drive C
and cartridge disk as B.
4. Enter the command, FMT548 C:. This command tormats
diskette currently installed in the tloppy disk drive.
assigns the tloppy disk drive C.
A)FMT548 C:(RETURN]
Enter Disk Drive to be tormatted (0-3):0
Format Single or Double Sided (S,D):D
Format System Tracks only (Y,N):N
Suppress Format Veritication (Y,N):N
Insert Diskette Into Drive 0 and Press The Return Key
the
CP/M
5. The system tormats the diskette installed in the tloppy disk
drive and displays the tollowing message:
Format complete
6. Copy the cartridge data to the tloppy disk using the PIP
command:
A)PIP C:=B:*.*[v] [RETURN]
[v] - allows veritication
7. When this is complete compare the two disk, master and new
copy using the directory command, allot the data tiles trom the
cartridge disk should now also be listed in the tloppy disk
directory:
A)DIR A:[RETURN)
A)DIR C:[RETURN]
This completes the copy procedure.
6-16