Specifications

The Operating System
6.4.6 Copying Diskettes to Cartridge (continued)
5. Copy the tloppy disk data to the hard disk, using the PIP
command:
A)PIP B:=C:*.*[v] [RE'rURN]
[v] - allows veritication
6. When this is complete compare the two disk, master and new
copy using the directory command:
A) DI R B: [RE'I'URN]
B)DIR C: [RETURN]
This completes the copy procedure. Remove the tloppy trom the
arive. Store this tloppy away in a sate location in case it is
ever needed.
6.5 Single User System (CP/M 3.0)
The tollowing sections describe tunctions and the commands that
execute those tunctions using the CP/M 3.0 operating system. It
you are currently using the TurboDOS operating system, then you
may skip to Section 6.7 tor these same tunctions and their
associated commands using the TurboDOS operating system.
6.5.1 Copying Fixed Disk to Diskette
This section describes the procedure tor copying data trom the
hard aisk to a tloppy disk.
To copy the tixed disk to a diskette, proceed as tollows:
1. Power up the system it it is not already running. The
operating system is assumed to be currently loaded on the tixed
portion ot the hard disk drive.
2. Insert a tloppy disk you want to copy data into the tloppy
disk drive it you have not already done so.
6-13