Specifications

The Operating System
6.4.4 Copying Cartridge to Fixed Disk (continued)
2. Power up the hard drive by pressing the run button on the
hard drive. Wait tor the drive to corne up to operating speed.
3. Enter the command, FMTHD. This command tormats the hard disk
drive. CP/M assigns the cartridge disk drive B.
A)FMTHD (RETURN]
[MENU DISPLAYED]
Enter drive to tormat: 20 (selection)
Do you want to tormat the Cartridge, Fixed or Both (C,F orB]7F
Which physical disk do you want to tormat (0-3)70
This operation will destroy all data on drive 0.
Hit return to continue or Control-C to abort.
4. The system tormats the tixed disk and displays the tollowing
message:
Format complete
5. Enter the command, ERA A:*.*. This command erases any entry
in the current directory. This system asks it you want to erase
all tiles:
A)ERA A:*.*[RETURN]
ALL (Y , N) Y
6. Copy the cartridge data to the tixed disk using the PIP
command:
A)PIP A:=B:*.* [v) [RETURN]
[v] - allows veritication
7. When this is complete compare the two disk, master and new
copy using the directory command, allot the data tiles trom the
cartridge disk should now also be listed in the tixed disk
directory:
A)OIR A: [RETURN]
A)OIR B: [RETURN]
This completes the copy procedure.
6-10