Specifications

The Operating System
6.4.1 Copying Hard Disk to Diskette (continued)
3. The logon message is displayed and the CP/M command prompt is
displayed:
A) - Where A is the tixed disk. The system assigns A to the
tixed disk when the system is booted trom the tixed disk.
The system assigns the tloppy disk as drive C and
cartridge disk as B.
4. Enter the command, FMT548. This command tormats the diskette
currently installed in the tloppy disk drive. CP/M assigns the
tloppy disk drive C.
A)FMT548 [RETURN]
Enter Disk Drive to be cormatted {0-3):0
Format Single or Double Sided (5,0):0
Format System Tracts only {Y:N):N
Surpress Format Veritication (YiN):N
Insert Diskette Into Drive 0 and Press The Return Key
5. The system tormats the diskette installed in the tloppy disk
drive and displayes the tollowing message:
Format complete
6. Use the PIP command to copy allot the tiles trom your source
diskette to the new one:
A)PIP C:=A:*.*[v] [RETURN]
[v] - allows veritication
7. In order to assure that the copy was successtul, check both
directories using the DIR command and compare them:
A)DIR A: [RETURN]
A)DIR C:[RETURN]
This completes the copy procedure. Remove the copy and store
this tloppy away in a sate location until it is needed.
6-6