Specifications

The Operating System
6.2.2 SUPER STAR TurboDOS Hardware Contiguration
Standard:
One SUPER QUAD CPU MOdule
One Hard Disk Controller MOdule
One Floppy Disk Drive, 5 1/4", 48TPI
One 10Mb Hard Disk Drive, 5Mb removable, 5Mb tixed
Optional:
SUPER SIX CPU MOdule
Up to tour additional SUPER SLAVE Modules
As in the case ot the CP/M system, the placement ot the modules
within the SUPER STAR card cage is not bus dependent and
theretore, can be placed in any slot you wish.
Table 6-1 shows the switch settings tor the tour SUPER SLAVE
modules. The Sl-1 through Sl-8, located on the SUPER SLAVE
module, assigns a hardware address to each slave port.
Table 6-1. SUPER SLAVE Switch Sl Address Settings
Slave and Port Number S1-8 S1-7 S1-6 S1-5 Sl-4 Sl-3 S1-2 Sl-1
Slave 11 Port hex 70 ON ON
OFF OFF OFF ON ON ON
Slave 12 Port hex 72
ON
ON
OFF OFF ON ON ON OFF
Slave 13 Port hex 74
ON ON
OFF OFF OFF ON
OFF ON
Slave 14 Port hex 76
ON ON OFF OFF OFF ON OFF OFF
6-2