Specifications

Installation and Initialization
5.5 Copying The System Disk (CP/M 2.2) (continued)
7. When the system has completed the tormatting ot the disk,
enter the LDRGEN command. This command should only be used it
you intend to boot trom the tixed drive when powering up the
system. It you do not want the system to boot trom the tixed
disk then skip to Step 10. The LDRGEN command puts a tract zero
loader ono the hard disk you are creating:
A)LDRGEN TRKODMA55.LDR[RETURN1
8. The system displays a series ot questions which must be
answered as tallows:
Physical drive no. ot loader destination (0-3):0
Write loader to cartridge or tixed [C or F1:F
9. Press RETURN. The system copies the loader trom the tloppy
drive to the tixed disk.
10. Copy the tile CPM.SYS trom the tloppy to the tixed disk as
tollows:
A)PIP B:CPM.SYS=A:CPMH.SYS[RETURN1
11. The tile CPM.SYS is copied to the tixed hard disk.
12. Next, set the tile CPM.SYS to read-only status.
A)STAT B:CPM.SYS $R/O[RETURN1
13. Once the CPM.SYS tile is set to read-only, copy the rest ot
the system disk to the tixed disk:
A)PIP B:A:*.*[v1 [RETURN1
[v1 - allows veriticatian
5-14