Specifications

SECTION 4
SYSTEM SPECIFICATIONS
4.1 Introduction
This section presents speciticationjntormation on the overall
SUPER STAR system as well as individual subsystems (such as the
tloppy disk drive and the hard disk drive).
4.2 System Power Requirements
The SUPER STAR operates on 110 or 220 volts AC, 50-60 Hz power
and is contigured at the tactory tor the power requirements ot
the country ot destination.
When contigured tor 110 VAC, the SUPER STAR is rated at 5 amperes
max. (625 watts). When contigured tor 220 VAC, the SUPER STAR is
rated at 2.5 amperes max. (625 watts).
NOTE
It the SUPER STAR is not contigured tor the AC
power used at your tacility, reter to section
4.4, Changing AC Voltage, tor the proper procedure.
4.3 Specitication Tables
The tollowing tables present specitications (and operating
parameters) tor SUbsystems and circuit boards associated with the
SUPER STAR system. The subsystems covered by these tables are as
tollows:
Table
4-1
SUPER
QUAD CPU
Module
Table
4-2
SUPER SIX
CPU
Module (optional)
Table
4-3
Hard Disk
Drive
and Controller Subsystem
Table
4-4
Floppy Disk
Drive
Table
4-5
SUPER SLAVE
fvlodule
Table
4-6
SUPER
STAR
Overall
Specitications
4-1