Specifications

SUPER STAR Physical Description
2.2 Maintrame Internal Parts
Figure 2-2 shows the major internal parts ot the SUPER STAR
system maintrame.
1. Internal Card Cage - The SUPER STAR system can support up to
six ditterent modules. One SUPER QUAD
or SUPER SIX CPU module, one hard disk
controller, and up to tour SUPER SLAVE
modules tor mUlti-user applications.
2. Rear Panel Connector - Ribbon cables which connect the
internal mOdules ot the SUPER STAR
system to the rear panel and
external 1/0 devices. The maximum
number ot 1/0 connectors is seven.
NOTE
Care should be taken to assure the cable connector
is properly connected. The red edge ot the ribbon
cable always denotes Pin 1. You can assure proper
connection by making sure that the ribbon cable is
plugged into the connector with the pin 1 edge
aligned with the" n on the connector receptacle.
3. Disk Drives - 5 1/4" and 10Mb disk drives.
4. Cooling Fan - The cooling tan circulates air to maintrame an
operating temperature which averages below 115
F inside the SUPER STAR system maintrame.
5 •
Power
Supply
- The power supply provides DC power to
internal modules such as, the CPU,
controller and any Slave modules
present. It also provides power to
disk drives.
Figure 2-2. SUPER STAR system Internal Section.
2-2
the
disk
it
the