System information

60
Chapter 7 Utilities
The “Utilities” Menu includes several
special options:
Enter the “Utilities” menu from the main
menu:
Utilities Options:
•RS232: Option not supported
•Default Parameters: Reset to factory
defaults.
•Firmware: Upgrade firmware (USB ,CD or FTP). As this may cause permanent
damage if incorrectly installed this option requires supplier’s confirmation.
•Hard Disk : Format drives.
•Alarm Outputs: Silence the alarm tone.
•Reboot: Reboot the DVR.
•Power Off: Turn off DVR power.
•View Log: View the DVR activity log.
•System Information: List of DVR information (versions, etc).
7.1 Default Parameters
Restore factory default settings: (The IP address,
gateway and port number will not be
restored). DVR IP address and subnet in “Network”
menu will not be restored.
7.2 Hard Disk
Hard Disk Management Options:
•Check Drive Status: Capacity, Free space,
Stand by/Normal status.
•Format the Drives:
Note: Before formatting stop all recording.
After formatting, you must reboot the DVR
otherwise the DVR will not function properly.