System information

58
6.14.3 PTZ Control
In “Preview” (Live view) mode, press the [PTZ] key to enter the PTZ control mode.
The screen is in camera 01 PTZ control mode. Press the [UP] [DOWN] [LEFT
[RIGHT] keys to manually position the dome.
6.14.4 Preset Setup
The Preset function allows the dome to
return to a predetermined position
(pan, tilt, zoom, iris and focus). In the
PTZ menu select the setup option (next
to “Preset).” The DVR can save up
to128 preset positions. Please make
sure the PTZ supports the preset
function before you setup the preset.
Add a preset number:
1. Enter the preset number (from 1-128) in the edit box. Then select “Adjust” to enter
the PTZ control interface. In PTZ control interface, you can use direction keys to
adjust PTZ position, and use [IRIS+] [IRIS-] [FOCUS+] [FOCUS-] [ZOOM+]
[ZOOM-] keys to adjust iris, focus and zoom. After you finish adjusting, press
[ENTER], then press the “Save” button to save the preset information. You can
repeat this step to setup additional preset positions for this camera.
2. After you finish the setup of all presets, press the “ESC” key to return to the PTZ”
menu. In “PTZ” menu, press the “Confirm” button to save all parameters.
Delete a Preset Number:
1. In “Preset” setup menu, input a preset number and press the “Delete” button to
delete the preset number information.
2. After deleting, press “ESC” to return to the “PTZ” menu. In “PTZ” menu, press
“Confirm” to save the modification.
Please make sure the PTZ you are using can support the preset functions.
6.14.5 Sequence (Tour) Setup
Each (Tour) sequence is made up of
several preset positions. Each preset
point includes a preset number, dwell
time and dwell speed. Please make sure
the PTZ you are using can support the
sequence function before you start the
setup. You can save 16 sequences.
1. In “PTZ” menu, select “Setup” on the
right side of “Sequence No” to enter the
“Sequence” setup menu: