System information

53
5. Alarm trigger record channel setup:
You can select channels to record for
each alarm input. In the sub menu, you
can use [ENTER] or [EDIT] to enable
the record channel. “×” means disable
and “ü ” means enable.
Note: In order to trigger the channel to
record, the channel must be enabled in
the “Recording” menu.
6. Schedule for alarm handle method:
When a schedule is enabled, external
alarms will trigger a DVR response only during the scheduled times.
7. Alarm handle method (alarm response): Alarm responses include: “On Screen
Warning”, “Audible Warning”, “Upload to Center”, “Trigger Alarm Output” and
“Send Email”.
Note: If “On Screen Warning” is enabled, an external alarm while viewing in the live
mode will cause the alarmed camera to display on the monitor. Multiple alarms will
sequence on the screen. When the external alarm clears the display will return to the
previous screen view.
8. Save setup: In “Alarm in Handling” sub menu, press the “Confirm” button to
return to the “Alarms” menu. In “Alarms” menu, press “Confirm” button to save the
parameters.
PTZ Linkage:
1. Select the “PTZ Linkage” button to
access the “PTZ Linkage” setup menu:
2. Select a camera and then select one of
following PTZ linkage options:
• Preset: Set the flag as “ü ” to enable
preset and enter the preset number in the
preset selection box. Please refer to
chapter 6.14 for preset setup.
• Sequence: Set the flag as “ü ” to
enable sequence and input the sequence
number. Please refer to chapter 6.14 for sequence setup.
• Cruise (Pattern): Set the flag as “ü ” to enable cruise (pattern). Please refer to
chapter 6.14 for cruise (pattern) setup.
3. Press the “Confirm” button to save and return to the “Alarms” menu. Press
“Cancel” to abort and return to the “Alarms” menu.