System information

42
6.5 Image Setup
6.5.1 Camera Name Setup
Camera Name: You can modify camera names in the “Camera Input Adjustment”
Menu. Note: Camera names can’t be copied to other cameras.
1. From the “Main Menu,” select the
“Image” menu.
2. Select a camera to configure.
3. Select the “Name” entry to modify the
camera name. Move the “Active
Window” to the camera name edit box
and press [EDIT] to enter the edit mode.
You can input numbers, uppercase and
lowercase characters (refer to Chapter
3.4). The camera name can be up to 32
characters.
4. Press [ENTER] to exit the edit mode.
5. Select “Confirm” and press [ENTER] to save the modification, or Press “Cancel”
or [ESC] to abort.
Position the name on the display:
1. If you do not want to display the camera name, disable the check box beside
camera name edit box. The disable flag is “×”. If you enable the check box, you
can setup the camera name position. You can copy the position to any other
camera. The setup steps are:
2. Enable the check box on the right side of camera name, then move the “Active
Window” to the “Position” button and press [ENTER] to enter the camera name
position setup interface.
3. Use the [ â ] [ á ] [ à ] [ ß ] keys to move camera name position. Press
[ENTER] to return the “Image Setup” menu. Press “Confirm” to save the settings, or
“Cancel” or [ESC] to abort.
6.5.2 Video Parameter Setup
This feature allows you to make changes to the visual display of individual cameras.
You can adjust the brightness, saturation, contrast and hue. You can setup the camera
individually and can copy the video parameters of one camera to any other cameras.
Here are the setup steps:
1. Enter the “Camera Input Adjustment” menu and select camera (use the [ â ] [ á ]
keys to select a camera).