System information

38
Note: If there is an error in entering or verifying the password an error message box
will appear. Denoting that the “Password Change Has Failed”.
In this case, press [ENTER] to return to the password edit box, and re-enter the new
password and verify again.
6.1.4 User Rights
Setup permissions for new users:
1. In the users list box of the “User
Management” menu, use the [ á ] [ â ]
keys to
select the user name, then use the [ à ] key
to move to the “Set Privileges” button
and press [ENTER].
Note: Operational rights are divided into
“Local Rights” and “Remote Rights”. You
can assign the necessary rights to the user.
1. Use the [ à ] [ ß ] keys to select items and press [ENTER] or [EDIT] to enable or
disable the item. “ü ” means the right is assigned to that user.
2. After assignment, press the “Confirm” button to save the settings, or “Cancel” to
abort.
User rights description:
Local Rights: Local rights are for local operation, such as the operation using front
panel, IR controller and RS-485 keyboard and PTZ control.
1. Record: Manual start/stop recording;
2. Playback: Local playback and backup the recorded files;
3. Parameters Setup: Local setup the DVR parameters;
4. Log: Local view of the DVR log;
5. Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down
DVR etc.
Remote Rights: Remote rights are similar to local rights, the exception being that you
can perform these functions from the remote software.
PTZ Control: Remote control PTZ:
1. Record: Remote manual start/stop recording
2. Playback: Remote playback, download of recorded files from DVR
3. Parameters Setup: Remote setup the DVR parameters