System information

Chapter 6 Advanced Operation Guide

Only users that have “Parameters Setup” permissions assigned to their user name can

perform the operations in this section. When the following parameters are modified

and saved, you must reboot the DVR before the new parameters take effective.

Parameters mentioned earlier do not require a reboot.

• Any network parameters in “Network” menu

• Stream type, resolution and record schedule in “Recording” menu

• External alarm sensor type in “Alarms” menu

• View tampering alarm schedule in “Image” menu

• Video loss alarm schedule in “Image” menu

• Motion detection alarm schedule in “Image” menu

• External alarm schedule in “Alarms” menu

• Alarm output schedule in “Alarms” menu

• RS232 mode in “RS232” menu

• Change video output standard in “Display” menu

• Change PTZ parameters in “PTZ” menu

6.1 User Management

The Factory Default user name and password is

“admin” “12345.” The user name “admin” can’t

be changed. You can change the admin password

for security reasons. Move the “Active Window”

to “User” and press the [ENTER] key to enter the

“User Management” menu.

Note: The system administrator (admin login name) can manage the permissions

assigned to individual users. Up to 15 additional users may be selected. When logged

on as “admin” you can add users, delete users, modify passwords and select

individual permissions for each user.