System information

32
Note: If backup device is not connected
correctly, or the DVR does not detect the
backup device, a “Device Error”
message will displayed.
Backup video clips:
You can back-up video clips as the file is being
played back. The steps are:
1. Search for and select the video you want to
export.
2. Play the video and press [EDIT] to start saving the clip.
3. Press [EDIT] again to mark the end of the clip. This clip is ready for export.
4. Repeat the steps above to select additional clips (up to 30 total).
5. Press [ESC] and a message window will display indicating the number of files to
be copied.
6. Select “Confirm” and the backup will begin. (“Cancel” will abort the process).
Press “Confirm” again at the “File Copied” message.
Note: The backup function is effective when two channels are played back
synchronously. In such case, each channel can backup 30 segments so 60 segments
can be backed up for two channels.
Playback backup video files:
You can playback recorded files in any PC using File Player software. File Player
software is available on the CD supplied with the DVR. You have a choice of format
on CDRW.
4.8 Powering Down the DVR
Note: Turning off the power switch on the rear panel, or pulling the power cord from
the unit is not recommended in order to avoid corrupting data on the disk drives. The
safest method is to enter the Menu and turn off the power using the Utilities Menu.
Alternately you can press and hold the front panel Power key (or, the IR Remote
Power key) for five seconds.