System information

1. Check Box: Provide 2 options. “ ” means enable and “ × ” means disable.

Select either [ENTER] or [EDIT] to change selections.

2. List Box: Provides more than 2 options. However, only one of them can be

selected. You can press [ENTER] or [EDIT] to enter into edit mode, then use

[] and [] to select one option. For example, on the right side of “Select

Camera”, there is a list box for you to select one camera.

3. Edit Box: Allows you to input characters. Press the [EDIT] key to enter the

edit mode. You can input characters as follows:

(1) Press the [A] key to select the entry mode (numbers, upper case, lower

case or symbols).

(2) Use [ à ] and [ ß ] keys to move the cursor.

(3) Use the [EDIT] key to delete the character in front of the cursor.

(4) Press [ENTER] or [ESC] to exit the edit mode.

4. Button: Execute a special function or enter into the next sub-menu. For

example, press the “Policy” button to enter into sub-menu. Press [Confirm]

to save parameters and return to the previous menu. Press the [Cancel] key

to cancel and return to previous menu. Grayed-out buttons indicate they can

be operated only after another selection is enabled.

Exiting the Menu: Press [ESC] to exit the menu and return to live view mode.

3.4 Character Input

There is a status line at the bottom of all character entry screens. For example: In the

“camera name” edit box the following status line appears at the bottom of screen.

The word ”Number” indicates that you can use the numeric keys to input numbers.

Press the [A] key to change input modes. Available options are “Number”, “Uppercase”,

“Lowercase” and “Symbol”.

Uppercase

Lowercase

Symbol

There are 24 symbols in all. They are divided into 4 pages. Press the [0] key to scroll

through the available selections.

Note: The character input scheme may seem difficult until you become familiar with its

operation. All setup procedures may be accomplished from the remote software using a

more familiar Windows format.