User guide

USER GUIDE

2850ST

PAUSE TV

Thanks to Pause TV, you can pause a program, have a several-minute break and resume watching without missing a single second.

To be able to use the Pause TV functionality choose an appropriate USB Memory Stick (at least 1GB) and plug it on the back panel of

your receiver. Then, the formatting process of the USB Memory Stick will begin and may last several seconds. If your USB Memory Stick

proves to be too slow, you can still use it but the quality of playback may not be satisfactory.

Once the Memory Stick has been prepared, press

to activate Pause TV (recording). To resume watching press . You can also

pause, fast-forward, rewind within the recorded content (see Remote Control).

Time of Pause mode depends on the capacity of your USB Memory Stick and the broadcast quality.

Take note that when Pause TV is turned off by pressing

or on channel change, the whole recorded content is lost.

While the receiver is in Pause TV mode a banner appears as presented below:

Mode icon indicates

the current state of the

Pause TV.

Time-Shift shows how much

time behind the live program

you are. “-12m18” means that

you are 12 minutes and 18

seconds behind the live video.

Gray bar shows how much

recording space for live

broadcast is still free.

Blue bar shows how

much recording space for

live broadcast is taken.

Slider shows which part

of the program you are

watching now.

Do not remove the

USB memory device

when you are using

the Pause TV function.