Manual

0692-01
3
RF124 Installation Instructions
P/D 013106
ADVANCED CONTROL TECHNOLOGIES, INC.
Indianapolis, Indiana 46278
Supply Voltage 120 VAC, +/-10%, 50 or 60 Hz
Power Consumption Less than 4.5W
Signal Input 120 KHz +/- 4 KHz, sensitive to 50 millivolts
Signal Output (Status) 6V peak to peak @ 5 ohms
Maximum switching capacity 20 Amps or 5000 VA
Maximum switching voltage 305 VAC
TROUBLSHOOTING
If the LED continues to blink repeatedly, recycle power to the unit, and then reprogram the unit. If problem remains
after power-up and reprogramming, return the unit to the distributor where purchased and replace the unit.
WARRANTY
For warranty and general product information visit our web site at www.act-solutions.com
ABOUT CERTIFICATION
This product has been thoroughly tested by the ETL SEMKO division of Intertek, a
nationally recognized testing laboratory. This product was found to be in compliance with
safety standards ANSI/UL STD 244A and CAN/CSA C22.2 No. 177.