User's Manual
ZDW120 Instructions
P/D 100504
HomePro
by ADVANCED CONTROL TECHNOLOGIES, INC.
0671-01
6
Parameter 10 Dim timer Parameter (default = 10)
Valid Values: 1-255
ALL ON/ALL OFF dim rate
Parameter 11 Dim step Parameter (default = 3)
Valid Values: 1-99
Parameter 12 Dim timer Parameter (default = 10)
Valid Values: 1-255
Each Configuration Parameter can be set to its default setting by setting the default bit in the Configuration Set
command. See your controller’s instructions on how to do this (and if it supports it).
All Configuration commands will be reset to their default state when the ZDW120 is reset from the Z-Wave system.
Powerlevel
The ZDW120 supports the Powerlevel command.
The Powerlevel command allows controllers to set and get the RF transmit power level of a node and test specific
links between nodes with specific RF transmit power. Refer to your controller’s instructions, if it supports this
command, for more information. This command is typically used by professional installers.
Version
The ZDW120 supports the Powerlevel command.
The ZDW120 can return version information about itself and the commands it supports. Refer to your controller’s
instructions on how to get this information from the ZDW120. The following is the version information for the
ZDW120.
COMMAND_CLASS_SWITCH_MULTILEVEL Version 1
COMMAND_CLASS_SWITCH_ALL Version 1
COMMAND_CLASS_PROTECTION Version 1
COMMAND_CLASS_ASSOCIATION Version 1
COMMAND_CLASS_POWERLEVEL Version 1
COMMAND_CLASS_CONFIGURATION Version 1
COMMAND_CLASS_VERSION Version 1
COMMAND_CLASS_MANUFACTURER_SPECIFIC Version 1
COMMAND_CLASS_MARK Version 1
COMMAND_CLASS_BASIC Version 1
COMMAND_CLASS_SWITCH_MULTILEVEL Version 1
Manufacturer Specific
The ZDW120 supports the Manufacturer Specific command.
The ZDW120 can return Manufacturer Specific information about itself. Refer to your controller’s instructions on
how to get this information from the ZDW120. The following is the manufacturer specific information for the
ZDW120.
Z-Wave Library Type ZW_LIB_SLAVE_ROUTING
Z-Wave Protocol Version 1
Z-Wave Protocol Sub Version 39
Application Version 1
Application Sub Version 0