Specifications

4-12 Information Manual
Section 4 Cirrus Design
Normal Procedures SR20
4. Strobe Lights............................................................................. ON
5. Mixture ......................................................................... FULL RICH
6. Power Lever ........................................................FULL FORWARD
7. Fuel Pump.....................................................PRIME, then BOOST
• Note •
On first start of the day, especially under cool ambient
conditions, holding Fuel Pump switch to PRIME for 2 seconds
will improve starting.
8. Propeller Area.....................................................................CLEAR
9. Power Lever ...........................................................OPEN ¼ INCH
10. Ignition Switch....................... START (Release after engine starts)
• Caution •
Limit cranking to intervals of 20 seconds with a 20 second
cooling period between cranks. This will improve battery and
contactor life.
11. Power Lever ..............................RETARD (to maintain 1000 RPM)
12. Oil Pressure ....................................................................... CHECK
13. Alt Master Switches .................................................................. ON
14. Avionics Power Switch .............................................................. ON
15. Engine Parameters ........................................................MONITOR
16. External Power (If applicable) ................................. DISCONNECT
17. Amp Meter/Indication ......................................................... CHECK
March 2010