User's Manual

ACR350 Validator with QR Code Scanner User Manual info@acs.com.hk
Version 1.02 www.acs.com.hk
Page 45 of 61
3.2.2.1. Mobile Network Settings
The Mobile Network settings contains three options, namely Connect, APN, and NTP date.
3.2.2.1.1. Connection and APN Settings
Figure 23: Connection and APN Settings
1. Select “Connectivity”.
2. Select Mobile Network,
and then select APN.
3. The APN can be set in this part
4. Select OpenKeyBoard
and type the desired
setting.
5. Select SetAPN. Success
message will be shown. Then
select BACK
6. Select Connect.
7. Select “Start”.
8. Select “Connect”.
9. The details of the network
will be shown
10. a. End the connection by
selecting Disconnect and
Stop.
10. b. Select “BACK, and then
select APN.
11. Type the IP address, select
Ping. The ping message will
be shown.